OpenBSD rdx200: Got the dmesg and emailed misc@. Now wait fer some solution.

I've emailed misc@ regarding the problem I currently have with 4.3 AMD64 installation. As it's my 1st post there, I'm a bit nervous. I kept thinking if my email is detailed enough or not, informative enough or not etc. Hopefully it'll be fine. I've also included the dmesg I got with the help of a friend from DaemonForums.org and OpenBSD's 4.3 i386 installation CD.

How I did it? OpenBSD FAQ 4.15 covered the proses. I prepared a msdos-formatted floppy and booted the pc using OpenBSD 4.3 i386 installation cd. Let the booting proses get through until you're presented with something like:

(I)nstall, (U)pgrade or (S)hell?

And choose (S)hell by pressing the "S" key and hitting "Enter" key. On the shell prompt, this is the command you'll need to get the dmesg like stated in FAQ 4.15:

# mount -t msdos /dev/fd0a /mnt
# dmesg >/mnt/dmesg.txt
# umount /mnt

Then reboot the pc. You can then read the dmesg.txt inside your floppy in windows. The file is *NIX formatted so it's quite hard to read as you'll see it like 1 long line of dmesg (if you're using NotePad). I opened it with the built-in text reader of Total Commander. So here's my dmesg.txt. Later then.

OpenBSD 4.3 (RAMDISK_CD) #645: Wed Mar 12 11:31:03 MDT 2008
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: AMD Athlon(tm) 64 Processor 3500+ ("AuthenticAMD" 686-class, 512KB L2 cache) 2.20 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2
real mem = 1072197632 (1022MB)
avail mem = 1030582272 (982MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/23/05, BIOS32 rev. 0 @ 0xfaa60, SMBIOS rev. 2.3 @ 0xf0000 (47 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 12/23/2005
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xcf74
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfce00/352 (20 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 21 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 3 5 10 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xee00 0xd0000/0x4000! 0xd4000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x01
ppb0 at pci0 dev 2 function 0 "ATI RX480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon HD 2600" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"ATI Radeon HD 2600 HD Audio" rev 0x00 at pci1 dev 0 function 1 not configured
ppb1 at pci0 dev 4 function 0 "ATI RS480 PCIE" rev 0x00
pci2 at ppb1 bus 2
mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x19, Yukon-2 EC rev. A2 (0x1): irq 3
msk0 at mskc0 port A: address 00:01:29:d3:79:27
eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
pciide0 at pci0 dev 17 function 0 "ATI IXP400 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide1 at pci0 dev 18 function 0 "ATI IXP400 SATA" rev 0x80: DMA
pciide1: using irq 10 for native-PCI interrupt
ohci0 at pci0 dev 19 function 0 "ATI IXP400 USB" rev 0x80: irq 3, version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI IXP400 USB" rev 0x80: irq 3, version 1.0, legacy support
ehci0 at pci0 dev 19 function 2 "ATI IXP400 USB2" rev 0x80: irq 3
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
"ATI IXP400 SMBus" rev 0x81 at pci0 dev 20 function 0 not configured
pciide2 at pci0 dev 20 function 1 "ATI IXP400 IDE" rev 0x80: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide2 channel 0 drive 0:
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd1 at pciide2 channel 0 drive 1:
wd1: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide2:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
wd1(pciide2:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
atapiscsi0 at pciide2 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: SCSI0 5/cdrom removable
cd0(pciide2:1:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
"ATI IXP450 HD Audio" rev 0x01 at pci0 dev 20 function 2 not configured
pcib0 at pci0 dev 20 function 3 "ATI IXP400 ISA" rev 0x80
ppb2 at pci0 dev 20 function 4 "ATI IXP400 PCI" rev 0x80
pci3 at ppb2 bus 3
pciide3 at pci3 dev 8 function 0 "CMD Technology SiI3114 SATA" rev 0x02: DMA
pciide3: using irq 11 for native-PCI interrupt
"VIA VT6306 FireWire" rev 0x80 at pci3 dev 9 function 0 not configured
skc0 at pci3 dev 10 function 0 "Marvell Yukon 88E8001/8003/8010" rev 0x13, Yukon Lite (0x9): irq 5
sk0 at skc0 port A: address 00:01:29:d3:78:f5
eephy1 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffcd netmask ffed ttymask ffef
rd0: fixed, 3800 blocks
uhidev0 at uhub1 port 1 configuration 1 interface 0 "vendor 0x15d9 USB Mouse" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
root on rd0a swap on rd0b dump on rd0b